NETGEAR ProSafe WC7520 Reference Manual page 114
20-ap wireless controller
Hide thumbs
Also See for ProSafe WC7520:
- Reference manual (162 pages) ,
- Datasheet (6 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Figure 56.
2.
Click the + button to create an additional ACL group. The new ACL group displays on the
advanced MAC Authentication screen, and the tab for the new ACL is automatically selected
to let you configure the new group.
Note:
By default, profile groups are named Acl-1, Acl-2, Acl-3, and so on.
You can change these ACL group names.
3.
In the Group Name field, enter a unique name for the ACL group.
4.
Compile the Selected Wireless Clients list as explained in the previous section,
Basic Local MAC Authentication
Note:
The wireless controller supports a maximum of 256 MAC addresses per
SSID.
5.
Click Apply to save your settings.
To delete an ACL group, select its tab, and then click Delete.
ProSafe 20-AP Wireless Controller WC7520
Settings.
Configuring Network Access and Security
114
Click + to add another ACL group.
Configure
Advertisement
Table of Contents
