Configuring Ip And Vlan Settings - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Configuring IP and VLAN Settings

The IP Settings screen lets you configure the management IP address settings of the
wireless controller.
To configure IP/VLAN settings:
1. Select Configuration > System > IP/VLAN. The IP Settings screen displays.
Figure 28.
2. Configure the settings as explained in
3. Click Apply to save your settings.
Table 10. IP Settings
Field
IP Settings
IP Address
IP Subnet Mask
Default Gateway
Primary DNS Server
Secondary DNS Server
WINS Server
Management VLAN Settings
Management VLAN
Table 10, IP
Description
This is the IP address of the wireless controller. The default IP address is
192.168.0.250. To change it, enter an available IP address from the address range
used on your LAN.
The subnet mask value used on your LAN. The default value is 255.255.255.0.
The IP address of the gateway for your LAN.
The IP address of the primary Domain Name Server (DNS) that you want to use.
Enter the IP address of the secondary DNS that you want to use.
Enter the IP address of the Windows INternet Name Service (WINS) that you want to
use.
Specify the management VLAN. See
Settings.
Management VLANs
Chapter 5: Configuring Network Settings
following this table.
| 57