View Blacklisted Clients - NETGEAR ProSafe WC7520 Reference Manual
20-ap wireless controller
Hide thumbs
Also See for ProSafe WC7520:
- Reference manual (162 pages) ,
- Datasheet (6 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
To see details about a client, select its corresponding radio button in the Select column of the
Client table, and then click the Details button to display the Client Details pop-up window.
Because this screen is identical to the Client Details pop-up window that you can access from
the Network Clients screen, see
Client Details pop-up window is shown in
View Blacklisted Clients
Figure 111.
The Blacklisted Clients screen lets you monitor all clients that attempted to connect but were
denied access because they provided incorrect authentication credentials or their MAC
address is blocked in a MAC ACL. To view additional clients, click Next; to return to the
previous clients, click Previous.
The following table explains the fields of the Blacklisted Clients table on the Blacklisted Clients
screen:
Table 49. Blacklisted clients information
Item
Description
Select
The radio button that lets you select the blacklisted client to locate it on a floor map.
MAC
The MAC address of the blacklisted client.
Type
The type of offense such as failed authentication (Authentication Failed) or denied access
because of a blocked MAC address (Denied Client).
AP-Name
The name of the access point to which the blacklisted client attempted to connect.
AP-IP
The IP address of the access point to which the blacklisted client attempted to connect.
RSSI
The received signal strength indicator (RSSI) of the blacklisted client.
SSID
The wireless network SSID that the blacklisted client used to attempt to connect to the access
point.
Count
The number of times the client's authentication failed.
Last Seen
The last time that the blacklisted client attempted to log in.
To see the location of the blacklisted client on a floor map, select the client's radio button (in
the Select column), and then click the Locate button.
Monitoring the Wireless Network and Components
ProSafe 20-AP Wireless Controller WC7520
Table 44
on page 165 for information about the fields. The
Figure 98
177
on page 165.
Advertisement
Table of Contents
