NETGEAR ProSafe WC7520 Reference Manual page 57

Table 7. Access point settings (continued)
Setting
Wireless Settings section
Antenna
Plan Settings section
Building
Floor
Location
5. Click Apply to save your settings.

To remove an access point from the Managed AP List:
1. On the Managed AP List, select the check box to the right of the access point that you
want to remove.
2. Click Remove.
ProSafe 20-AP Wireless Controller WC7520
Description
You can specify which antenna the access point uses by making a selection from
the drop-down list:
• Internal. The access point uses its internal antenna.
• External. The access point uses its external antenna or antennas. External
antennas are optional antennas that do not come standard with an access point.
After you have configured buildings (see
page 41), select the building in which the access point is located from the
drop-down list.
After you have configured floors (see
page 41), select the floor on which the access point is located from the drop-down
list.
Enter a name that is meaningful to you.
Access Point Discovery and Management
57
Define and Edit Buildings and Floors
Define and Edit Buildings and Floors
on
on