Configure The License Server Settings - NETGEAR ProSafe WC7520 Reference Manual

Configure the License Server Settings


To configure the license server settings:
1. Select Maintenance > License, and then click the Server Settings tab. The Server
Settings screen displays:
Figure 77.
2. Configure the settings as explained in the following table:
Table 34. License server settings
Setting
Update From
Use a Proxy Server to
Connect to the Internet
This Proxy Server
Requires Authentication
3. Click Apply to save your settings.
ProSafe 20-AP Wireless Controller WC7520
Description
Select one of the following radio buttons to specify the license update server:
• Default Update Server. The default license update server is used.
• Specify Update Server. You need to specify the license update server. Fill in
the Server Address field.
Server Address Enter the IP address or FQDN of the server from which you
import your licenses.
Select this check box if you use a proxy server to connect to the Internet.
Proxy Server Enter the IP address or FQDN of the proxy server.
Proxy Port Enter the port that the proxy server uses.
Select this check box if the proxy server requires authentication.
User Name Enter the user name to access the proxy server.
Password Enter the password to access the proxy server.
Maintaining the Controller
140