NETGEAR ProSafe WC7520 Reference Manual page 68

Figure 35.
2. Configure the settings as explained in the following table:
Table 14. Email configuration settings
Setting
Server Address
Port
Sender Email Address
Authentication Required
3. Click Apply to save your settings.
ProSafe 20-AP Wireless Controller WC7520
Description
Enter the IP address of the server from which email notifications are sent.
Enter the port number of the server from which email notifications are sent. The
default is port number 25.
Enter the email address from which email notifications are sent.
Select this check box if the email server requires authentication, and complete
the User Name and Password fields.
User Name Enter the user name that is associated with the email server.
Password Enter the password that is associated with the email server.
Configuring Network Settings
68