Monitor The Wireless Controller - NETGEAR ProSafe WC7520 Reference Manual

The following table explains the fields of the Profiles table on the Network Profiles screen:
Table 45. Network security profiles information
Item
SSID
Security
Radio Mode
Status
Controller IP
Group Name

Monitor the Wireless Controller

To monitor a specific wireless controller, log in to its web management interface, and use the
Monitor Controller screens described in this section.
Note: If you stack wireless controllers, you can view similar information
about the stack by using the network monitor screens (see
the Network

To monitor the wireless controller:
1. Select Monitor > Controller.
2. Select one of the following submenu links to display a wireless controller monitoring screen:
• Summary. See
• Usage. See
• Access Points. See
• Clients. See
• Rogue AP. See
• Profiles. See
• DHCP Lease. See
• Captive Portal Users. See
Controller
ProSafe 20-AP Wireless Controller WC7520
Description
The wireless network SSID for the security profile.
The security mode (Open, WEP, WPA, WPA2, or WPA/WPA2) for the security
profile.
The wireless mode for the security profile (802.11b/bg/ng or 802.11a/na).
The status of the security profile (Active or Inactive).
The IP address of the wireless controller on which the security profile is configured.
The name of the group of which the security profile is a member.
on page 156).
View the Wireless Controller Summary Screen
View Wireless Controller Usage
View Access Points Managed by the Wireless Controller
View Clients Managed by the Wireless Controller
View Rogue Access Points Managed by the Wireless Controller
View Security Profiles Managed by the Wireless Controller
View DHCP Leases Provided by the Wireless Controller
View Captive Portal Users Managed by the Wireless
Monitoring the Wireless Network and Components
167
Monitor