Chapter 2 System Planning And Deployment Scenarios; System Planning; Preinstallation Planning - NETGEAR ProSafe WC7520 Reference Manual

20-ap wireless controller
Hide thumbs Also See for ProSafe WC7520:
Table of Contents

Advertisement

System Planning and Deployment
2.
Scenarios
This chapter includes the following sections:

System Planning

Management VLAN and Data VLAN Strategies
Deployment Scenarios
System Planning
This section includes the following subsections:

Preinstallation Planning

Before You Configure a Wireless Controller
Single Controller Configuration with Basic Profile Group
Single Controller Configuration with Advanced Profile Groups
Stacked Controller Configuration
Preinstallation Planning
Before you install any wireless controllers, determine the following:
Number of access points required to provide seamless coverage
Number of wireless controllers required
802.11 frequency band and the channels that are optimal for Wi-Fi usage
NETGEAR recommends that you perform a site survey:
Run a spectrum analysis of channels of the site to determine the current RF behavior and
detect both 802.11 and non-802.11 noise.
Run an access point-to-client connectivity test to determine the maximum throughput
achievable on the client.
Identify potential RF obstructions and interference sources.
Determine areas where denser coverage might be required because of heavier usage.
26
2

Advertisement

Table of Contents
loading

Table of Contents