View Rogue Access Points Managed By The Wireless Controller - NETGEAR ProSafe WC7520 Reference Manual

View Rogue Access Points Managed by the Wireless Controller

Figure 104.
The Controller Rogue AP screen lets you monitor all rogue access points that were detected
by the wireless controller. To view additional rogue access points, click Next; to return to the
previous rogue access points, click Previous.
The following table explains the fields of the Rogue AP table on the Controller Rogue AP
screen:
Table 47. Controller rogue AP information
Item
Select
MAC
SSID
Channel
Privacy
Last Beacon
Category
Known/Unknown
Name
Monitoring the Wireless Network and Components
ProSafe 20-AP Wireless Controller WC7520
Description
The radio button that lets you select the rogue access point to locate it on a floor
map.
The MAC address of the rogue access point.
The wireless network SSID that the rogue access point is using.
The channel that the rogue access point is using.
The security of the rogue access point (Secured or Unsecured).
The last beacon that the rogue access point transmitted.
The category that the rogue access point belongs to. From the drop-down list, you
can select to display Neighbor, Rogue, or All access points.
The status of the rogue access point. From the drop-down list, you can select to
display Known or Unknown access points.
The name of the rogue access point, if you assigned a name.
172