Edit And Remove Profiles From An Advanced Profile Group; Remove An Advanced Profile Group; Manage Basic And Advanced Profile Groups In The Wlan - NETGEAR ProSafe WC7520 Reference Manual

Edit and Remove Profiles from an Advanced Profile Group


To edit an existing profile to an advanced profile group:
1. On the Profile Groups screen, click a tab to select a profile group.
2. Click Edit. The Edit Profile screen displays.
3. Click a tab to select a radio.
4. Click a tab to select a profile.
5. Change the settings as explained in the
6. Click Apply to save your settings.

To remove an existing profile from an advanced profile group:
1. On the Profile Groups screen, click a tab to select a profile group.
2. Click Edit. The Edit Profile screen displays.
3. Click a tab to select a radio.
4. Click a tab to select a profile.
5. Click Delete, and then confirm that you want to delete the profile.

Remove an Advanced Profile Group


To remove an advanced profile group:
1. On the Profile Groups screen, click a tab to select a profile group.
2. Click Delete.
Note: You edit profile groups by adding, removing, or changing profiles.

Manage Basic and Advanced Profile Groups in the WLAN

By default, all access points are automatically assigned to the basic profile group. You can
use this screen to assign access points to other profile groups.

To assign access points to a profile group:
1. Select Configuration > WLAN Network. The WLAN Group Assignment screen
displays:
ProSafe 20-AP Wireless Controller WC7520
Table 15
Managing Security Profiles and Profile Groups
82
on page 73 and Table 16 on page 76.