Time Management - NETGEAR ProSafe WC7520 Reference Manual

Figure 27.
2. Configure the settings as explained in the following table:
Table 8. General settings
Setting
Name
Country/Region
Controller
Location Code
3. Click Apply to save your settings.

Time Management

This screen lets you configure the time-related settings of your wireless controller and
managed access points.

To configure time settings:
1. Select Configuration > System > Time. The Time Settings screen displays:
ProSafe 20-AP Wireless Controller WC7520
Description
Enter a unique value as the wireless controller name. NETGEAR recommends
changing the name as soon as possible after setting up. The name needs to contain
only alphabetical characters, numbers, and hyphens, and needs to be 31 characters or
less.
From the drop-down list, select the region of operation for the wireless controller and
the access points managed by the wireless controller. This setting is crucial for optimal
performance of the wireless controller. The wireless controller uses the country code to
determine the best wireless settings for your access points. In the United States, the
country is preset and cannot be changed on the access points. If the country or region
is not set up correctly, the wireless controller might not be able to access the access
points.
Optionally, enter a code to identify the physical location of the wireless controller. This
is especially useful if you use more than one wireless controller.
Configuring Network Settings
59