Configure Syslog And Alarm Notification Settings; Configure Syslog Settings - NETGEAR ProSafe WC7520 Reference Manual

Configure Syslog and Alarm Notification Settings

From the Alerts menu you can configure the syslog and the alarms, and specify the email
address from which alerts originate.

Configure Syslog Settings

This screen lets you configure the settings to connect to a syslog server, if you have one
configured in your network.

To configure Syslog settings:
1. Select Configuration > System > Alerts > Syslog. The Syslog Settings screen
displays:
Figure 33.
2. Configure the settings as explained in the following table:
Table 13. Syslog settings
Setting
Enable Syslog
Syslog Server IP Address Enter the IP address to which the wireless controller and managed access
Server Port Number
3. Click Apply to save your settings.
ProSafe 20-AP Wireless Controller WC7520
Description
Enable the syslog settings, if you have a syslog server on your network.
points will send all syslogs, if the Syslog check box is selected.
Enter the number of the port at which your syslog server is configured to listen to
requests.
Configuring Network Settings
66