Manage Mac Authentication And Mac Authentication Groups - NETGEAR ProSafe WC7520 Reference Manual
20-ap wireless controller
Hide thumbs
Also See for ProSafe WC7520:
- Reference manual (162 pages) ,
- Datasheet (6 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
b. Click one of the following two buttons, both of which are located below the Rogue
List:
•
Known. Moves the selected access points to the known list. As an option, for
each access point, you can enter a name in the Name column, so the access
point is more easily identified.
•
Unknown. Moves the selected access points to the unknown list.
3.
Click Apply to save your settings.
Importing a List of Known Access Points from a File
You can import a list of known access points from a saved file. To do this, create a text file
that includes the MAC address of each access point. This file needs to be a simple text file
with one MAC address per line. The wireless controller can support a total of up to 512
access points from the known and unknown lists combined.
To import a list of known access points from a file:
1.
Create a text file that includes a list of MAC addresses for the access points. Each MAC
address should be on a separate line with hard returns between lines as shown in the
following example:
00:00:11:11:22:29
00:00:11:11:22:28
00:00:11:11:22:27
00:00:11:11:22:26
00:00:11:11:22:25
2.
Select Configuration > Security > Advanced > Rogue AP to access the Rogue AP
screen.
3.
Click Browse, navigate to the file containing the list of known access points, and select it.
4.
Next to Import Known List, select one of the following radio buttons:
•
Merge. Merges the list of access points that you intend to import with those that are
already present in the Rogue List.
•
Replace. Replaces the access points that are present in the Rogue List with those in
the file that you intend to import.
5.
Click Import.
6.
Click Apply to save your settings.
Manage MAC Authentication and MAC Authentication
Groups
MAC authentication lets you set up an external or a local access control list (ACL) with MAC
addresses of clients to either allow or deny the network access privilege of the specified
clients with the wireless controller–managed access point. The settings are applied only to
managed access points.
ProSafe 20-AP Wireless Controller WC7520
Configuring Network Access and Security
110
Advertisement
Table of Contents
