NETGEAR ProSafe WC7520 Reference Manual page 17

• Manage QoS settings. Manage QoS queue settings for data, background, video, and
voice traffic for access point profile groups.
• Configure RF management settings. Configure WLAN healing and wireless coverage
hole detection for the entire network or for access point profile groups.
For more information, see
Centrally Manage Security in the Network
• Manage secure access to the network and secure data transmission. Manage client
authentication, encryption, wireless client security separation, and MAC authentication in
access point profiles.
• Manage authentication servers for the network. Manage all internal and external
authentication servers for the entire network or for access point profile groups.
• Manage MAC authentication. Specify trusted and untrusted MAC addresses for the
entire network.
• Manage rogue access points. Manage rogue access points and their associated clients
in the network.
• Manage guest access. Manage guest access and captive portal access to the network.
For more information, see
Manage Other Wireless Controllers in the Network
• Manage stacking. Specify the primary and secondary wireless controllers in a stack and
synchronize information between the wireless controller.
• Manage redundancy groups. Specify the primary and secondary wireless controllers in
redundancy group and enable failover protection.
For more information, see
Monitor the Network and Its Components
• View heat maps. View the real-time heat maps for a deployed WLAN. See the RF signal
propagation per floor, and identify coverage holes and weak signal spots.
• Monitor the status of all wireless devices. View the status the wireless controllers,
access points, clients, access point profiles, and the entire network, and view network
usage statistics.
• Monitor network health. See which access points are healthy and which ones are down
or compromised.
For more information, see
ProSafe 20-AP Wireless Controller WC7520
Chapter 7, Configuring Wireless and QoS
Chapter 8, Configuring Network Access and
Chapter 10, Managing Stacking and
Chapter 11, Monitoring the Wireless Network and
Introduction and Overview
17
Settings.
Security.
Redundancy.
Components.