NETGEAR ProSafe WC7520 Reference Manual page 64
20-ap wireless controller
Hide thumbs
Also See for ProSafe WC7520:
- Reference manual (162 pages) ,
- Datasheet (6 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Table 11. DHCP settings (continued)
Setting
IP Network
Subnet Mask
Default Gateway
Start IP
End IP
Use Default DNS Server Select this check box to allow the DHCP server to use the wireless controller's
Primary DNS Server
Secondary DNS Server
Use Default WINS
Server
WINS Server
4.
Click Add to save your settings and add the new DHCP server to the DHCP Server List.
To edit a DHCP server:
1.
On the DHCP Server List, select the radio button in the Edit/Remove column that
corresponds to the DHCP server that you want to edit.
2.
Click Edit. The Edit DHCP Server pop-up window displays. This window is identical to the
Add DHCP Server window (see the previous figure).
3.
Make your changes (see the previous table).
4.
Click Apply to save your changes.
To delete a DHCP server:
1.
On the DHCP Server List, select the radio button in the Edit/Remove column that
corresponds to the DHCP server that you want to remove.
2.
Click Remove.
ProSafe 20-AP Wireless Controller WC7520
Description
Enter the IP address for the wireless controller in the VLAN that you have
specified in the VLAN field. If you have not selected the Use VLAN Interface
check box, the IP address of the wireless controller's management VLAN is
used.
Enter the subnet mask that is assigned to the wireless clients by the DHCP
server.
Enter the IP address of the default network gateway for all traffic beyond the local
network.
Enter the starting IP address of the range that can be assigned by the DHCP
server.
Enter the ending IP address of the range that can be assigned by the DHCP
server.
default DNS servers. The Primary DNS Server and Secondary DNS Server fields
are masked out.
Enter the IP address of the primary DNS server for the network.
Enter the IP address of the secondary DNS server for the network.
Select this check box to allow the DHCP server to use the wireless controller's
default WINS server. The WINS Server field is masked out.
Enter the IP address of the WINS Server for the network.
Configuring Network Settings
64
Advertisement
Table of Contents
