NETGEAR ProSafe WC7520 Reference Manual page 42

.
Figure 14.
2. The Buildings table shows the names of the previously defined buildings and their number of
floors.
3. To add a building, click Add. The Add Building pop-up window displays.
4. Enter a name for your building in the Building Name field, and then click Add. The new
building is added to the Buildings table. The name is an alphanumeric string up to 64
characters in length.
5. To define the floors of the building, select the radio button that corresponds to the building,
and then click Edit. The Layout Floors screen displays:
Figure 15.
6. Define the floors as explained in the following table:
Table 4. Building name and floors
Setting
Building
Building Name
ProSafe 20-AP Wireless Controller WC7520
Description
You can modify the previously defined building name, which is an alphanumeric string
up to 64 characters in length.
RF Planning
42