•
AC power socket. Attach the power cord to this socket. (There is no separate on/off
power switch.)
Bottom Panel with Product Label
The product label on the bottom of the wireless controller's enclosure displays the default IP
address, default user name, and default password, as well as regulatory compliance, input
power, and other information.
Figure 3.
WC7520 Wireless Controller System Components
A WC7520 wireless controller system consists of one or more wireless controllers and a
collection of access points that are organized into groups based on location or network
access.
The wireless controller system can include a single wireless controller, a single wireless
controller with a backup wireless controller for N:1 redundancy, or a group of up to three
stacked wireless controllers, with or without a redundant wireless controller.
The WC7520 wireless controller system supports the following access point models:
•
NETGEAR WNAP210 ProSafe wireless-N access point
•
NETGEAR WNAP320 ProSafe wireless-N access point
•
NETGEAR WNDAP350 ProSafe dual-band wireless-N access point
•
NETGEAR WNDAP360 ProSafe dual-band wireless-N access point
Future releases will support additional access point models.
ProSafe 20-AP Wireless Controller WC7520
Introduction and Overview
14