NETGEAR ProSafe WC7520 Reference Manual page 81

Select the Local radio
button to display the
Local MAC ACL
Group drop-down list.
Select the External
radio button to
display the External
Radius Server
drop-down list.
Figure 39.
4. Click a tab to select a radio.
5. Specify the settings as described in
6. Click Apply to save your settings.
7. To add another profile to the new profile group:
a. Click a tab to select a radio.
b. Click the + button. The Add Profiles pop-up window displays:
Figure 40.
c. Either click Add, or, if you want to clone an existing profile, select the Clone an
existing Profile check box, select a profile from the Profiles drop-down list, and
then click Add. The newly created profile displays onscreen, and the tab for the new
profile is automatically selected to let you configure the new profile.
8. Specify the settings as described in
9. Click Apply to save your settings.
ProSafe 20-AP Wireless Controller WC7520
Click + to add another profile.
Table 15
Table 15
Managing Security Profiles and Profile Groups
81
on page 73 and Table 16
on page 73 and Table 16
Your selection from
the Network
Authentication
drop-down list
determines the
information that is
displayed onscreen.
on page 76.
on page 76.