NETGEAR ProSafe WC7520 Reference Manual page 3

202-10686-02 v1.0
202-10686-01 v1.4
202-10686-01 v1.3
202-10686-01 v1.2
202-10686-01 v1.1
202-10686-01 v1.0
ProSafe 20-AP Wireless Controller WC7520
March 2011 Added the following new information:
• Support for the WNAP320 access point.
• New features:
- Capability to specify use of an access point's internal or
external antenna or antennas (see
Access Point
- Capability to adjust the Tx power for all managed access
points (see
- Capability to adjust the channel and Tx power for
individual access points (see
Settings).
- Capability to edit IP settings of individual access points
(see
- Display of radio-mode capabilities on the managed AP list
(see
Revised existing content and reorganized the manual.
Made changes to some monitoring screens (see
Monitoring the Wireless Network and
October 2010 Made a minor revision to indicate the number of supported MAC
addresses per SSID.
September 2010 Added an index and made minor revisions to existing content.
September 2010 Added new content and revised existing content in chapters 1,
2, 4, 5, 9, and 10.
Added chapters 11 and 12 and appendix A.
September 2010 Added new content to chapters 1 through 4.
August 2010 Initial publication.
3
Information).
Configure Channels).
Configure Wireless
Manage the Access Point List).
Manage the Access Point List).
Components).
Edit and Remove
Chapter 11,