NETGEAR ProSafe WC7520 Reference Manual page 80

The following table describes the fields that are shown for each profile in a profile group.
Table 17. Profile group settings
Setting
Name
Radio
Authentication
2. Click the + button to create an additional profile group. The new profile group displays on the
advanced Profile Groups screen. By default, an NG_11g-0 profile and an NG_11a-0 profile
are present in a profile group.
Note: By default, profile groups are named Group-1, Group-2, Group-3,
and so on. You cannot change these profile group names.
3. Click Edit. The advanced Edit Profile screen displays.
Note: The selections that are available In the Network Authentication field
are affected by the authentication server settings that you specify on
the Authentication Server screen. See
Servers and Authentication Server Groups
selection in the Network Authentication field requires authentication,
an additional field, the corresponding Authentication Server field,
displays.
ProSafe 20-AP Wireless Controller WC7520
Description
The unique profile name.
The wireless radio mode in which the profile is operating.
The authentication setting under which the profile is operating.
Managing Security Profiles and Profile Groups
80
Manage Authentication
on page 115. If the