NETGEAR ProSafe WC7520 Reference Manual page 128

4. Configure the settings as explained in the following table:
Table 31. Firmware upgrade settings
Setting
TFTP, FTP, or Local File
Server Parameters section (TFTP and FTP only)
Server IP
File Name
User Name (FTP only)
Password (FTP only)
Boot Information section
Active Partition
Boot Partition to Upgrade
After upgrade boot from
Schedule section
Schedule Update Status
When to Upgrade?
5. Click Apply to save your settings. If you selected the Now radio button to upgrade the
firmware immediately, the wireless controller reboots.
ProSafe 20-AP Wireless Controller WC7520
Description
Select one of the following radio buttons to specify from which location the
upgrade should occur. The screen adjusts to display the fields that are required
for each upgrade location.
• TFTP. Upgrade from a TFTP server. The Server IP and File Name server
parameters fields display.
• FTP. Upgrade from an FTP server. All of the server parameters fields display.
• Local File. Upgrade from a local file that you have downloaded. The server
parameter fields do not display, but the Browse field becomes available.
Follow the directions of your browser to select the firmware upgrade file from
your computer.
Enter the IP address of the TFTP or FTP server.
Enter the file name of the firmware.
Enter the user name to access the FTP server.
Enter the password to access the FTP server.
This is an informational field that displays the active partition and the current
firmware version.
Select the radio button for the partition to which the new firmware should be
saved.
Select the radio button for the partition from which the wireless controller
should reboot after the firmware has been upgraded.
This is an informational field that displays when the firmware upgrade will
occur. If no update is scheduled, the field displays None.
Select when the firmware upgrade should occur:
• Later. Make selections from the drop-down lists to specify the date and time
when the upgrade should occur.
• Now. The upgrade occurs immediately after you click Apply.
Maintaining the Controller
128