ProSafe 20-AP Wireless Controller WC7520 Reference Manual
Time Management
This screen lets you configure the time-related settings of your wireless controller and
managed access points.
To configure time settings:
Select Configuration > System > Time. The Time Settings screen displays:
1.
Figure 27.
Configure the settings as explained in
2.
Click Apply to save your settings.
3.
Table 9. Time Settings
Field
Time Zone
Current Time
NTP Client
Use Custom NTP Server Select this check box if you want to use an alternate NTP server. By default, the
Hostname/IP Address
Configuring IP and VLAN Settings
The IP Settings screen lets you configure the management IP address settings of the
wireless controller.
Table 9, Time
Description
The local time zone for your region or country.
The current time at your location
Enable this to use a Network Time Protocol (NTP) server to synchronize the clock of
the wireless controller and managed access points. Disable this option if you do not
want to use an NTP server
NETGEAR NTP server is used.
Provide the host name or IP address of the NTP server, if you are using a custom
NTP server
Settings.
Chapter 5: Configuring Network Settings
| 53