NETGEAR ProSafe WC7520 Reference Manual page 47

• Location of rogue access points
• Location of clients associated with the access points
• Location of blacklisted clients

To view the heat map for a building floor and to adjust access points:
1. Select Plans > Deployed. The Deployed Buildings screen displays:
.
Figure 18.
The Deployed Buildings screen shows a tab for each building that you previously defined.
For each building, the screens shows the floors that you previously defined.
2. Select the building and floor for which you want to view the heat map by clicking the
corresponding tabs.
3. Click Heat Map. The heat map for the selected floor displays:
Figure 19.
ProSafe 20-AP Wireless Controller WC7520
RF Planning
47