NETGEAR ProSafe WC7520 Reference Manual page 112

Figure 55.
As an option, you can import a list of MAC addresses from a file. For more information,
see the next section.
2. Next to Trust ACL as, select one of the following radio buttons:
• Allow. Network access is granted to the clients for which the MAC addresses are
listed in the Selected Wireless Clients list.
• Deny. Network access is denied to the clients for which the MAC addresses are listed
in the Selected Wireless Clients list.
3. Add a wireless client to the Selected Wireless Clients list through one of the following
methods:
• Enter a MAC address in the MAC Address field, and then click Add.
• Select a MAC address from the Available Wireless Clients list, and then click Move.
The Available Wireless Clients list contains wireless stations that are present in the
vicinity of the access point.
To delete a MAC address from the Selected Wireless Clients list, select the corresponding
check box, and then click Delete.
Note: The wireless controller supports a maximum of 256 MAC addresses per
SSID.
4. Click Apply to save your settings.
Importing a MAC List from a File
You can import a precompiled list of MAC address from a saved file. This file needs to be a
simple text file with one MAC address per line.
ProSafe 20-AP Wireless Controller WC7520
Configuring Network Access and Security
112