Configure Wireless Settings; Basic Wireless Configuration - NETGEAR ProSafe WC7520 Reference Manual
20-ap wireless controller
Hide thumbs
Also See for ProSafe WC7520:
- Reference manual (162 pages) ,
- Datasheet (6 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
3.
Configure the settings as explained in the previous table.
4.
Click Apply to save your settings.
Configure Wireless Settings
Typically, the default wireless settings do not need adjustment. Override the wireless settings
only if there is a specific need, such as a phone vendor that specifies a setting different from
the default. You can configure wireless settings for the basic profile group and for advanced
profile groups (see
Basic Wireless Configuration
To configure basic wireless settings:
1.
Select Configuration > Wireless > Basic > Wireless. The Basic Wireless Settings
screen displays:
Figure 44.
2.
Click a tab to select a radio.
3.
Select the Turn Radio On check box to enable configuration of the wireless settings.
ProSafe 20-AP Wireless Controller WC7520
Advanced Wireless Configuration for Profile Groups
Configuring Wireless and QoS Settings
87
on page 90).
Advertisement
Table of Contents
