Appendix A Factory Default Settings And Technical Specifications - NETGEAR ProSafe WC7520 Reference Manual

Factory Default Settings and Technical
A.
Specifications
You can restore the wireless controller to its factory default settings on the Reboot/Reset
Controllers screen (see
the Factory Defaults button on the rear panel (see
Default Settings
settings shown in the following table:
Table 50. Factory default settings
Feature
Login User login URL
User name (case-sensitive)
Login password (case-sensitive)
LAN LAN IP
Subnet mask
Default gateway
Time zone
Time zone adjusted for daylight
savings time
SNMP
The following table lists the technical and physical specifications.
Table 51. Technical and physical specifications
Feature
Electrical specifications
Dimensions (W x H x D)
Weight
Reboot or Reset the Wireless Controller
on page 182). The wireless controller will return to the factory configuration
Use the Factory Default Button to Restore
Default Setting
http:192.168.0.250
admin
password
192.168.0.250
255.255.255.0
192.168.0.1
PST for North America, GMT for other locations
Enabled
Disabled.
Default Setting
100-240V, AC/50-60 Hz, universal input
DC 5V/8A (internal power supply)
cm: 26.1 x 4.3 x 44
in.: 10.3 x 1.7 x 17.3
kb: 2.912
lb: 6.4
186
A
on page 129) or by using