NETGEAR ProSafe WC7520 Reference Manual page 20

d. Check the lights on the front of the wireless controller:
• Power. The green Power LED should be lit. If the Power LED is not lit, check the
connections and check to see if the power outlet is controlled by a wall switch that
is turned off.
• Test. The Test LED is on briefly when the controller is first turned on.
• LAN The Ethernet (LAN) LED should be lit (amber for 10/100 Mbps and green for
1000 Mbps) indicating that a connection has been made. If it is not, make sure
that the Ethernet cable is securely attached at both ends.
2. Log in to the wireless controller:
a. Open your browser and type http://192.168.0.250 in the browser's address field.
Note: You need to use a web browser such as Microsoft Internet Explorer
5.1 or later or Mozilla Firefox l.x or later with JavaScript, cookies,
and SSL enabled.
The wireless controller's login window displays:
Figure 5.
b. When prompted, enter admin for the user name and password for the password,
both in lowercase letters.
c. Click Login. The wireless controller's web management interface displays, with the
default status screen (the path is Monitor > Controller > Summary), which shows the
network status and related information:
ProSafe 20-AP Wireless Controller WC7520
Introduction and Overview
20