Configure Alarm Notification Settings; Configure The Email Notification Server - NETGEAR ProSafe WC7520 Reference Manual

Configure Alarm Notification Settings

You can classify certain events as critical, major, normal, or minor. Some events you can
classify only as critical or major. For example, on the RF Management screen, you can
specify whether a coverage hole should be classified as critical or major (see
Management on page 96).

To configure alarm actions:
1. Select Configuration > System > Alerts > Alarms. The Alarm Actions screen displays:
Figure 34.
2. For each alarm severity (Minor, Normal, Major, and Critical), select the desired action from
its corresponding Action drop-down list.
• No Action. When the alarm occurs, no action is taken.
• Add To Syslog. When the alarm occurs, the wireless controller adds an entry to the
syslog.
• Send Email. When the alarm occurs, the wireless controller sends an email.
3. For each alarm severity for which you have selected the Send Email option in the previous
step, enter an email address.
4. Click Apply to save your settings.

Configure the Email Notification Server

The email notification server is the location from which the email alerts originate.

To configure email settings:
1. Select Configuration > System > Alerts > Email. The Email Configuration screen
displays:
ProSafe 20-AP Wireless Controller WC7520
Configuring Network Settings
67
Basic RF