NETGEAR ProSafe WC7520 Reference Manual page 145

Figure 80.
The Stacking table shows all wireless controllers in the stack, with their IP address and
role (Master or Slave).
2. Click Add to add a wireless controller to the stack. The Add Settings pop-up window
displays:
Figure 81.
3. Configure the settings as explained in the following table:
Table 35. Stacking settings
Setting
Controller IP
UserName
Password
4. Click Add. The wireless controller is added to the Stacking table, which shows the following
fields:
ProSafe 20-AP Wireless Controller WC7520
Description
Enter the IP address of the controller.
The user name is a nonconfigurable field that displays the user name with which you
logged in to the web management interface of the wireless controller.
Enter the password to access the controller.
Managing Stacking and Redundancy
145