Manage Remote Access - NETGEAR ProSafe WC7520 Reference Manual

2. Attach the external storage device to the USB port on the front panel of the wireless
controller.
3. Click Mount. The storage details become visible on the Extended Storage screen. Before
you remove the external storage device from the USB port, click Unmount.

Manage Remote Access

Enable SNMP to allow SNMP network management software, such as HP OpenView, to
monitor the wireless controller by using SNMPv1 or SNMPv2c protocol.
WIth the exception of the following features, you can configure the wireless controller through
SNMP:
• Heat maps
• Guest access management
• RF management
• Stacking management

To enable and configure SNMP:
1. Select Maintenance > Remote Management > SNMP. The SNMP screen displays:
Figure 66.
2. Enable SNMP and configure the settings as explained in the following table:
Table 32. SNMP settings
Setting
SNMP
Read-Only Community Name
ProSafe 20-AP Wireless Controller WC7520
Description
Select this check box to enable SNMP for the wireless controller.
Enter the community string that allows the SNMP manager to read the
wireless controller's MIB objects. The default setting is public.
Maintaining the Controller
132