To Set The "Auto Panel Reset" Function - Minolta CF 2002 Advanced Information

9

To set the "Auto Panel Reset" function

This function is used to specify the length of time after the last operation
until all functions automatically return to their default settings. (The default
setting is [1 min. / Copy].)
For details on the automatic panel reset, refer to "Feeding the Document"
on page 5-5.
1
Press the [Utility] key.
2
Touch [User's Choice: 1].
3
Touch [2/2].
4
Touch [Auto Panel Reset].
5
Press the [C] (clear) key. The current setting is erased.
6
Using the keypad, enter the desired length of time (between 1 and 9
minutes).
H
If you do not wish for the copier to automatically reset its modes
and functions, touch [No].
9-20
Utility Mode Operations
CF2002/CF3102