3
Queuing a job during warm-up
An image can be scanned (a job can be queued) while the machine warms
up after it is turned on. If a job is queued, printing begins after the copier
has finished warming up (after about 5 minutes at normal room
temperature (20 °C)).
Sleep Mode
If the copier is not used for 30 minutes, it automatically enters Sleep mode.
TIP
The length of time after the last operation until the copier enters Sleep
mode can be specified using the "Sleep" function on the User's
Choice: 1 screen.
For more details, refer to chapter "9 Utility Mode Operations".
§
Press the [Start] key.
(The Sleep mode can also be canceled by pressing any key on the
operation panel or by touching the touch panel.)
3-32
Before Making Copies
CF2002/CF3102