Utility Mode Operations
To set the "Auto-select Paper for Small Original" function
This function is used to select whether or not to print documents with a
size that is too small and cannot be automatically detected. (The default
settings are "OFF" and the 1st drawer.)
If this function is set to "ON", copies will be made even under the
conditions described above. In this case, since the document size cannot
be detected and the paper cannot be automatically selected, the paper
(source) must be selected.
If this function is set to "Off", copies cannot be made under either of the
following conditions.
When the [Start] key is pressed with the Paper setting "Auto Paper"
selected, but the size of the document is too small to be detected and
the paper cannot be selected
When the [Start] key is pressed with the Paper setting "Auto Paper"
selected, but no document has been loaded
1
Press the [Utility] key.
2
Touch [User's Choice: 2].
3
Touch [2/2].
4
Touch [Auto-select Paper for Small Original].
CF2002/CF3102
9
9-39