Table of Contents
Advertisement
13
Function combination code keys
Code
—
13-18
Explanation
The functions can be combined.
The functions cannot be combined. The function set last has priority.
The functions cannot be combined. The function set first has priority.
A warning message will appear.
The functions cannot be combined. The function set first has priority.
No warning message will appear, or other functions will not be available after
the first function is selected.
The functions cannot be combined.
The functions can be combined only when the document is fed manually.
A warning message will appear.
If paper is loaded through the manual bypass tray, a warning message
appears that the functions cannot be combined. If paper is not to be loaded
through the manual bypass tray, de-select it as the paper source.
If paper is loaded through the manual bypass tray, copying cannot be
interrupted.
A warning message appears that the manual bypass tray should be selected
as the paper source. Previously selected settings will be canceled when paper
is loaded.
v
The "Mixed Orig Detection" function cannot be used when making "single-
sided
double-sided" copies.
The functions cannot be combined depending on the finisher model.
The "Original Direction" and "Margin" functions can be specified, but their
settings are not applied.
A message appears, warning that the paper is unsuitable for double-sided
printing.
The settings for the "Dot Matrix Original" parameter (39) and the "Text
Enhancement" function (38) do not affect printing. For example, set the "Text
Enhancement" function (38) to "+3 (Darker)" while the "Text" setting (32) is
selected. Then, if the Photo/Density setting "Photo Image" (35) is selected, the
"Text Enhancement" setting of "+3 (Darker)" will not affect the printing.
The settings for the "Dot Matrix Original" parameter (39) and the "Text
Enhancement" function (38) are maintained, even if all modes and function are
returned to their default settings using the "Auto Panel Reset" function.
For example, set the "Text Enhancement" function (38) to "+3 (Darker)" while
the "Text" setting (32) is selected. Then, select a Photo/Density setting that the
Text Enhancement setting has no effect on, such as "Photo Image".
Next, select a Photo/Density setting where the Text Enhancement setting can
be specified, such as the "Text" setting (32) or the "Map" setting (34). The
previously specified Text Enhancement setting of "+3 (Darker)" is maintained.
The "Centering" function from the Utility mode can be set, but will not be
applied.
Appendix
CF2002/CF3102
Advertisement
Table of Contents
