Table of Contents
Advertisement
16
5. Auxiliary Functions
Panel Resetting
The Panel Reset Key resets all control panel
settings to default settings including the
number of copies and zoom ratio.
If an Automatic / Duplexing Document
*
Feeder is used, the original present on
the Original Glass will be ejected out of
the unit.
Useful Tip
The Panel Reset Key enables you to cancel
all previous settings efficiently. To avoid
miscopy, try to press this Key before
making any setting for your own copy job.
Auto Panel Reset Function
If no key on the Control Panel is pressed
within about 60 sec. after a copy cycle has
been completed or copy settings made, the
Auto Panel Reset Function is activated to
return the copier to the default settings.
Useful Tip
The time for the copier to enter the Auto
Panel Reset Function can be changed to 30
sec.
Also, the Auto Panel Reset function can be
enabled or disabled by the User's Choice.
p. 56
Auto Copy Start Function
Even during warm-up, the copier can be set
into the Auto Copy Start Function by loading
the originals onto the Automatic / Duplexing
Document Feeder and pressing the Start Key.
This function allows a copy process to be
started as soon as the copier completes
warming up.
Auto Shut OFF Function
The Auto Shut OFF Function shuts down the
copier a given period of time after the copier
has been used last. The initial setting is 60 min.
Useful Tip
The time for the copier to enter the Auto
Shut OFF Mode can be selected from 1 to
120 min. by using the User's Choice.
p. 57
NOTE
Consult your Technical Representative if
you do not want to activate this function.
Interrupt Mode
The Interrupt Mode allows you to interrupt a
current job and run a different one. Pressing
the Interrupt Key once sets the copier into the
Interrupt Mode. Pressing the Key again
cancels the Interrupt Mode and returns to the
previous settings.
Useful Tips
If the current job involves 2-sided
copying or Cover Mode, the copier
rejects an Interrupt Mode.
If the current job involves Sort,
Sort-and-Staple or Group, Non-Sort is
automatically selected at the same time
when the copier is set into the Interrupt
Mode.
Hide quick links:
Advertisement
Table of Contents
