Table of Contents
Advertisement
7
Automatic "Sort"/"Non-Sort" Setting Selection
When a document is loaded into the duplexing document feeder, the
"Non-Sort" setting is automatically selected if the document consists of
only one page, and the "Sort" setting is automatically selected if the
document consists of 2 or more pages.
Whether or not the "Sort" or "Non-Sort" setting is automatically selected
can be specified using the "Intelligent Sorting" function on the User's
Choice: 2 screen. For more details, refer to "To set the "Intelligent Sorting"
function" on page 9-34.
Non-Sorting ("Non-Sort" Setting)
The copies are fed out and stacked on top of each other as they are
printed.
Crisscross Non-Sorting ("Non-Sort" Setting)
The copies are fed out in an alternating
crisscross pattern.
However, crisscross non-sorting is only
performed if the following conditions
are met.
G
The finisher is not installed.
G
Paper of the same size and type
must be loaded with the landscape
orientation (crosswise) in one paper
drawer and with the portrait orientation (lengthwise) in another drawer.
G
The duplexing document feeder must be used.
G
The document must not contain pages of various sizes (i.e., "Mixed
Orig Detection" function not used).
G
"Auto Paper" must be selected for the Paper setting.
G
Staple and hole-punch Finishing settings must not be selected.
G
The "Criss Cross Mode" function on the User's Choice: 2 screen must
be set to "Yes".
H
For details on the "User's Choice" functions, refer to "To set the "Criss
Cross Mode" function" on page 9-35.
Sorting ("Sort" Setting)
The copies are automatically divided into the specified number of sets with
each set containing a copy of each page.
7-14
Advanced Operations
1
1
1 3
2
1
1
4
Example: For 4 sets
CF2002/CF3102
Advertisement
Table of Contents
