Table of Contents
Advertisement
10
10.3
Specifying Expert Mode functions
In the Expert mode, various print image adjustments can be selected.
Expert Mode functions:
G
[Thick Paper and OHP Film Image Density] refer to p. 10-25
This function allows the density of the image printed on thick paper to
be adjusted.
G
[Color Shift Corrections (C)] refer to p. 10-26
These functions are used to make fine adjustments in the color shift of
the printed image.
G
[Monochrome Image density correct] refer to p. 10-30
This function is used to make adjustments to the printed image of
black-and-white copies. (This function is only available on the
CF2002.)
G
[Stabilizer] refer to p. 10-30
This function is used to perform image stabilization.
G
[PRT Area (Top Margin)] refer to p. 10-31
These functions are used to make fine adjustments to the print area
margins of a printed image.
G
[Center Binding Position] refer to p. 10-37)
This function is used to make fine adjustments to the center stapling
position and the folding position when binding.
10-24
Administrator Mode Operations
CF2002/CF3102
Advertisement
Table of Contents
