Utility Mode Operations; Utility Screen - Minolta CF 2002 Advanced Information

Utility Mode Operations

9 Utility Mode Operations
9.1

Utility Screen

The functions available on the Utility screen, displayed by pressing the
[Utility] key, are described below.
If the [Utility] key is pressed, the following screen appears.
[Input] refer to p. 9-3
G
"Reset Mode" function: The initial mode settings, selected after the
copier is reset, can be changed.
G
"Job Memory Input" function: Up to 10 copy modes can be stored as
copy programs.
[Meter Count] refer to p. 9-9
G The various counters, showing the number of copies that have been
made since the copier was installed, can be viewed.
[User's Choice: 1] [User's choice: 2] refer to p. 9-11
G The various functions can be set according to the user's needs.
G
There are two User's Choice screens.
H
The functions that can be set while a job is printing are on the User's
Choice: 1 screen, and the functions that can be set while the copier is
waiting to print are on the User's Choice: 2 screen.
[Copy Program Recall] refer to p. 9-8
G The various copy programs stored with the "Job Memory Input"
function, described above, can be recalled.
[Unit life indicator] refer to p. 9-43
G The level of use for the various supplies and parts can be checked.
CF2002/CF3102
9
9-1