To Set The "Auto Clear Mode" Function - Minolta CF 2002 Advanced Information

9

To set the "Auto Clear Mode" function

This function is used to specify whether or not the copier clears all settings
when it detects that the user of the copier has changed, for example, when
the magnetic card has been removed from the optional data controller or
when the key counter has been removed. (The default setting is [Yes].)
For details on clearing all settings when a new user is detected, refer to
"Feeding the Document" on page 5-5.
1
Press the [Utility] key.
2
Touch [User's Choice: 1].
3
Touch [2/2].
4
Touch [Auto Clear Mode].
5
Select the desired setting.
6
Touch [Enter].
7
Touch [Fin. Time], and then touch [Fin. Time] again in the screen that
appears.
9-26
Utility Mode Operations
CF2002/CF3102