To Set The "Auto Panel Reset" Function - Minolta Di2010f User Manual

5

To set the "Auto Panel Reset" function

This function is used to specify when the Basics screen is automatically displayed
if no operation is performed while a program or settings are being specified.
1
Press the [Utility] key.
2
Touch [User Set], and then touch [User's Choice].
3
Touch [3/6], and then touch [Auto
Panel Reset].
4
Select the desired length of time
until the Basics screen is
displayed, and then touch [Enter].
❍ The length of time until the
Basics screen is displayed can
be set to 30 seconds, 1, 2, 3 or
5 minutes, or [No Reset].
5
Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.
5-18
5.3 Changing Default Settings
Di2010f/Di2510f/Di3010f/Di3510f