Administrator Mode Operations
10.1
Specifiying Administrator settings
To set the "Top Erase" function
This function is used to set the amount of loss at the edge of the original.
This amount is erased during printing. (The default setting is [5 mm].)
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Admin. set].
5
Touch [Top Erase].
6
Select the desired setting.
7
Touch [Enter].
8
Touch [Fin. Time] again in the next three screens that appear.
CF2002/CF3102
10
10-3