Table of Contents
Advertisement
Utility Mode Operations
9.3
Specifying Default Settings
("User's Choice" Functions)
With the User's Choice function, the initial mode settings can be
customized according to how the copier is to be used.
User's Choice: 1 Screen
Default Settings:
G
[Confirmation Beep] refer to p. 9-14
This function is used to specify whether or not a confirmation beep is
sounded each time a key in the operation panel is pressed.
G
[Date/Time Set ] refer to p. 9-15
This function is used to set the current date and time.
G
[Memory Recall] refer to p. 9-17
This function is used to set the memory recall feature, which allows
settings from past copy jobs to be recalled.
G
[Key Repeat Start/Intervall] refer to p. 9-19
This function is used to specify the length of time until the repeat
feature for a key starts and the length of the time that a key must be
held down between subsequent repeats.
G
[Auto Panel Reset] refer to p. 9-20
This function is used to specify the length of time after the last
operation until all functions return to their default settings.
G
[Energy Saver] refer to p. 9-22
This function is used to specify the length of time after the last
operation until the copier automatically enters Energy Saver mode.
G
[Sleep] refer to p. 9-24
This function is used to specify the length of time after the last
operation until the copier automatically enters Sleep mode.
CF2002/CF3102
9
9-11
Advertisement
Table of Contents
