To Clear Jammed Staples In Fn-8 - Minolta CF 2002 Advanced Information

Touch Panel Messages

To clear jammed staples in FN-8

When a finisher is installed and the staples are jammed, the message
shown below appears.
Follow the procedure below to clear the jammed staples.
If the paper is pulled out in any way other than that described below, the
stapler unit may be damaged.
1
Slide the finisher away from the
copier.
2
Open the cover of the horizontal
transport unit.
3
Remove any paper, and then close
the cover of the horizontal transport
unit.
CF2002/CF3102
11
11-37