Administrator Mode Operations
To set the "Stabilizer" function
If the image is incorrect, even after the gradation levels have been
adjusted, set the "Stabilizer" function.
The following two modes are available with the "Stabilizer" function.
G
Reset And Stabilizer Mode
G
Stabilizer Mode
The "Stabilizer" function performs an image stabilization based on past
data up to the previous session.
Image stabilization should normally be performed with "Stabilizer Mode"
selected.
Select "Reset And Stabilizer Mode" only if the desired effect cannot be
attained with the "Stabilizer Mode".
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Expert Mode].
5
Touch [Stabilizer].
CF2002/CF3102
10
10-41