Table of Contents
Advertisement
Before Making Copies
3.7
Useful Operations
Auto Panel Reset
The machine automatically resets all modes and functions to their default
settings if one minute has passed without the machine performing any
operations.
If the magnetic card is removed from the optional data controller, the
machine assumes that the user has changed and automatically resets all
modes and functions to their default settings.
When the touch panel is reset, all settings that have not been stored, such
as the number of copies, return to their default settings (p. 3-40).
The conditions for all modes and functions automatically returning to their
default settings can be specified using the "Auto Panel Reset" function on
the User's Choice: 1 screen. For more details, refer to "To set the "Auto
Panel Reset" function" on page 9-20.
Energy Saver Mode
If the copier is not used for 15 minutes, it automatically enters Energy Sav-
er mode.
When the copier enters Energy Saver mode, the indicator on the [Start]
key remains lit in green and the touch panel goes off. The copier
conserves energy and waits to receive a job.
If the copier is not used for 30 minutes, it automatically enters Sleep mode.
TIP
The length of time after the last operation until the copier enters
Energy Saver mode can be specified using the "Energy Saver"
function on the User's Choice: 1 screen. For more details, refer to
chapter "9 Utility Mode Operations".
To recover from Energy Saver mode
1
Press the [Start] key. (The Energy Saver mode can also be canceled
by pressing any key on the operation panel or by touching the touch
panel.)
2
The touch panel comes on again, and then after the copier has fin-
ished warming up, it is ready to begin printing (after about 30 seconds
at normal room temperature (20 °C)).
CF2002/CF3102
3
3-31
Advertisement
Table of Contents
