Specifying The Input Screen Functions - Minolta CF 2002 Advanced Information

Utility Mode Operations

Specifying the Input Screen Functions

The following two functions are available on the Input screen (when [Input]
is touched).
[Reset Mode] refer to page 9-4
G The initial mode settings, selected after the copier is reset, can be
changed.
[Job Memory Input] refer to p. 9-6
G User-specified copy modes can be stored as copy programs.
G
Up to 10 specified copy modes can be stored as copy programs.
These stored copy programs can be recalled by touching [Copy
Program Recall] on the Utility screen.
CF2002/CF3102
9
9-3