To Set The "Memory Recall" Function - Minolta CF 2002 Advanced Information

Utility Mode Operations

To set the "Memory Recall" function

Memory recall function (The default setting is [Yes].)

This feature allows past copy jobs to be recalled and printed again.
 Up to 49 past copy jobs are saved.
 If the number of copy jobs exceeds 49 or the memory becomes full,
jobs are deleted, starting from the oldest.

Deleted jobs cannot be recalled. For details on recalling past copy
jobs, refer to "Feeding the Document" on page 5-5.
 The "Memory Recall" function and the "Copy Track" function cannot be
used at the same time. In order to use the "Memory Recall" function,
the "Copy Track Mode" parameter on the "Copy Track" screen must
be set to "No". For details on setting the "Copy Track Mode" parameter
on the "Copy Track" screen, refer to "To set the "Copy Track Mode"
parameter" on page 10-12.
1
Press the [Utility] key.
2
Touch [User's Choice: 1].
3
Touch [Memory Recall].
4
Select the desired setting.
CF2002/CF3102
9
9-17