9
To set the "Energy Saver" function
This function is used to specify the length of time after the last operation
until the copier automatically enters Energy Saver mode. (The default
setting is [15 min.] for entering Energy Saver mode.)
For details on the Energy Saver mode, refer to "Feeding the Document"
on page 5-5.
1
Press the [Utility] key.
2
Touch [User's Choice: 1].
3
Touch [2/2].
4
Touch [Energy Saver].
5
Press the [C] (clear) key.
The current setting is erased.
6
Using the keypad, enter the desired length of time (between 10 and
240 minutes).
9-22
Utility Mode Operations
CF2002/CF3102