Table of Contents
Advertisement
Administrator Mode Operations
To set the "Center Binding Position" function
This function is used to make fine adjustments to the center stapling
position and the folding position when binding. (The default setting is [0
mm].)
Use the "Booklet Creation" setting to make a copy sample.
For details on booklet-binding, refer to "Feeding the Document" on
page 5-5.
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Expert Mode].
5
Touch [Center Binding Position].
6
Compare the width of the left pages of the copy sample with the width
of the right pages.
CF2002/CF3102
10
10-37
Advertisement
Table of Contents
