When The Message "Replace Staple Cartridge." Appears - Minolta CF 2002 Advanced Information

Touch Panel Messages
11.3 When the Message "Replace Staple Cartridge."
Appears
When finisher FN-116 or FN-8 is installed and is about to run out of
staples, the message shown below appears.
Follow the procedure below to replace the staple cartridge.
Display in Enlarge Display Mode
If the staples are empty, [ ! ] appears in the screen on the touch panel.
Touch [ ! ] to display the message shown in the following illustration.
Note
Be sure to replace the staple cartridge only after the message
appears, otherwise the machine may be damaged.
CF2002/CF3102
11
11-7